Coder module specification

Application: industrial stepper motor servo motor, printer, special sewing machine, nc machine tool, all kinds of automation equipment.

Main features: lightning protection, anti - reverse connection, anti - static. Convenient installation with fixed hole location, all devices adopt industrial quality reliable, stable output waveform, can withstand high and low temperature start-up.

Photoelectric encoder module: output side - wave ABZ signal 6 - way output.

Code plate: 400 lines, 3 phases, inside diameter 8mm, outside diameter 25mm, height 6.5mm, flange diameter 10mm, optical center AB phase 10.8mm.

Output waveform diagram

Code plate specification

1. According to the installation drawing, place the code plate and plate on the motor, install screws in the hole position, and fix the plate.

2. Make the film of the code plate on the reading area.

3. Adjust the position of the code disk up and down. The film is located in the middle and upper part of the optical encoder reading area.

4. Fixed code plate.

Installation drawing